IS4521-2303
IS4521-2303

Model #: IS4521-2303


PLEASE NOTE: Pelican-Hardigg Single Lid cases shown may include optional, non-standard configurations that require additional specification and cost. Please contact Pelican Customer Service to discuss available configurations.

Commercial Quote Locate an Authorized Dealer Near You.
Product Features
  • Removable Lid
  • Freebreathing
  • Black Carbon Steel, All Catch and Strike Hardware
  • 8 Large Injection Molded Comfort Grip handles
  • Colors: BLACK_032, GREY_133, OLIVE DRAB_137, RED_130, TAN_250
  • Inter-Stacking Pattern Cases for NATO pallets, JMIC containers, 463L pallets or sea containers
  • Hardware: Black Stainless Steel
  • Pressure Relief Valve (PRV) with Closed Gasket
  • Metal Handles: Black Stainless Steel
  • 2 Cable Catch locks per case
  • 2 Padlock Hasps per case
  • 3" X 5" Horizontal Card Holder
  • Front Labels, STD Labels and ATA Labels
  • Pressure Relief Valve
  • Humidity Indicator
  • Lift Grip (750 lbs LC each installed)
  • Skid Runners (4” height)

Overview

IS4521-2303 Shifting loose cargo can slow down your ops and threaten the mission with damaged freight. The new ISP Case from Pelican™ virtually eliminates load movement with a unique Inter-Stacking Pattern (ISP). The patent pending system is compatible across 6 different case sizes from 4 to 25 cubic feet of storage. Equipped with a silicone sponge O-ring and pressure release valves, the ISP Case is impervious to extreme weather and wet conditions.

The system is designed to maximize the volume of standard logistics platforms. Whether loading standard pallets, NATO pallets, JMIC containers, 463L pallets or sea containers, the ISP Case system will make the most efficient use of cargo space.

With its Inter-Stacking Pattern there is no question where the next case belongs. The disc pattern bottom mates with the wave pattern on the case below, literally falling and locking into place. Cross-stacking builds incredibly tight loads that can save time with strapping or netting.
STANDARD COLORS
Grey 133
Fed Std #26270
Tan 250
Fed Std #20372
LT Blue 135
Pantone #292U
White 132
Fed Std #27925
LT Yellow 136
Pantone #012U
DK Green 138 - Forest
Fed Std #24052
Orange 134
Fed Std #12197
DK Yellow 131
Fed Std #23538
Maroon 197
Pantone #202U
DK Blue 101
Fed Std #25052
Black-032
Fed Std #27040
Red 130
Fed Std #21105
Olive Drab-137
Fed Std #34096
Purple-129
Pantone #245U



Specs

Dimensions
Interior (L×W×D)
45.00 x 21.00 x 26.00"
Exterior (L×W×D)
48.00 x 24.00 x 32.00"
Measurements
Lid Depth
3.00"
Bottom Depth
23.00"
Total Depth
26.00"
Int Volume
14.2 ft³
Weights
Weight
72.00lbs
Materials
Body Material
RotoMolded Polyethylene
Latch Material
Steel (Nickel-black Plated)
Optional Hardware
136
O-Ring Material
Silicone Sponge
Purge Body Material
Aluminum
Hardware Material
134
Temperatures
Minimum Temperature
-20°F
Maximum Temperature
140°F
Warranty
Warranty Period
1 Year Material and Workmanship
Testing
Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.
  • MIL-STD-810E, Method 505.3, Procedure II – SOLAR RADIATION
  • ASTM E96, MIL-C-4150J and ASTM D 1008-64 – WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
  • FED SPECIFICATION L-P-390c, Type M. – TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
  • FED-STD-101, Method 5009 – LEAK TEST
  • FED-STD-101, Method 5016 & DOT 49CFR 178.350 – CONCENTRATED LOAD (STACK/SUPERIMPOSED)
  • FED-STD-101, Method 5011 – HANDLING
  • MIL-STD-810E, Method 514.4 – VIBRATION (COMPOSITE INPUTS)
  • MIL-STD-810E, Method 516.4, Procedure IV – SHOCK (TRANSIT DROP)
  • MIL-STD-810E, Method 501.3, Procedure I – TEMPERATURE (STORAGE, HIGH TEMPERATURE)
  • MIL-STD-810E, Method 502.3, Procedure I – TEMPERATURE (STORAGE, LOW TEMPERATURE)
  • MIL-STD-810E, Method 507.3, Procedure I – RELATIVE HUMIDITY
  • MIL-STD-810E, Method 500.3 – ALTITUDE (LOW PRESSURE)
  • MIL-STD-210C & MIL-STD-810D, Method 510.2, Procedure I – SAND AND DUST
  • MIL-STD-810E, Method 509.3, Procedure I @ 5% – SALT FOG
  • MIL-STD-810D, Method 508.4 – FUNGUS
  • MIL-STD-810D, Method 506.2, Procedure I – RAIN WITH WIND
  • MIL-STD-810D, Method 512.2, Procedure I – IMMERSION ONE (1) METER
  • ATA 300, Category I – REQUIREMENTS FOR REUSABLE CONTAINERS