IS5321-3303FT
IS5321-3303FT

Model #: IS5321-3303FT

Available Colors

Configuration: Fork Truck

PLEASE NOTE: Pelican-Hardigg Single Lid cases shown may include optional, non-standard configurations that require additional specification and cost. Please contact Pelican Customer Service to discuss available configurations.

Commercial Quote Locate an Authorized Dealer Near You.
Product Features
  • The cross-stack features of Inter -Stacking Pattern (ISP) Case from Pelican, virtually eliminates load movement and maximizes the volume of standard logistics platforms
  • Disc pattern bottom mates with the wave pattern on the case below allowing for Cross-stacking which builds incredibly tight loads
  • Cases are designed to provide a modular solution for standard military pallets. Compatibility with:
  • 40 x 48 Standard Pallets
  • NATO Pallet 1000 x 1200
  • Military 463L Pallet
  • JMIC (Joint Modular Intermodal Container)
  • Sea Containers

Overview

IS5321-3303FT

Logistics have long relied on the standard military pallets to move large loads to the theater of operations. However, unorganized and loose loads can threaten operations such as cargo airdrops. The ISP Case system allows all 16 sizes to be mixed on a standard military pallets with no wasted space. The Inter-Stacking Pattern builds a tight, stable load with minimal strapping or netting. Upper level cases, when cross-tied to the layer below, can effectively control shifting of the entire load.

Available in several sizes, these cases are completely configurable with a wide range of bolt-on options like document holders, casters, humidity indicators and much more.

STANDARD COLORS
Grey 133
Fed Std #26270
Tan 250
Fed Std #20372
LT Blue 135
Pantone #292U
White 132
Fed Std #27925
LT Yellow 136
Pantone #012U
DK Green 138 - Forest
Fed Std #24052
Orange 134
Fed Std #12197
DK Yellow 131
Fed Std #23538
Maroon 197
Pantone #202U
DK Blue 101
Fed Std #25052
Black-032
Fed Std #27040
Red 130
Fed Std #21105
Olive Drab-137
Fed Std #34096
Purple-129
Pantone #245U



Specs

Dimensions
Interior (L×W×D)
52.75 x 20.75 x 36.25"
Exterior (L×W×D)
55.75 x 23.75 x 41.63"
Measurements
Lid Depth
2.94"
Bottom Depth
33.31"
Total Depth
36.25"
Int Volume
23.0 ft³
Weights
Weight
84.80lbs
Materials
Body Material
RotoMolded Polyethylene
Latch Material
Steel (Nickel-black Plated)
Optional Hardware
136
O-Ring Material
Silicone Sponge
Purge Body Material
Aluminum
Hardware Material
134
Temperatures
Minimum Temperature
-20°F
Maximum Temperature
140°F
Warranty
Warranty Period
1 Year Material and Workmanship
Testing
Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.
  • MIL-STD-810E, Method 505.3, Procedure II – SOLAR RADIATION
  • ASTM E96, MIL-C-4150J and ASTM D 1008-64 – WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
  • FED SPECIFICATION L-P-390c, Type M. – TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
  • FED-STD-101, Method 5009 – LEAK TEST
  • FED-STD-101, Method 5016 & DOT 49CFR 178.350 – CONCENTRATED LOAD (STACK/SUPERIMPOSED)
  • FED-STD-101, Method 5011 – HANDLING
  • MIL-STD-810E, Method 514.4 – VIBRATION (COMPOSITE INPUTS)
  • MIL-STD-810E, Method 516.4, Procedure IV – SHOCK (TRANSIT DROP)
  • MIL-STD-810E, Method 501.3, Procedure I – TEMPERATURE (STORAGE, HIGH TEMPERATURE)
  • MIL-STD-810E, Method 502.3, Procedure I – TEMPERATURE (STORAGE, LOW TEMPERATURE)
  • MIL-STD-810E, Method 507.3, Procedure I – RELATIVE HUMIDITY
  • MIL-STD-810E, Method 500.3 – ALTITUDE (LOW PRESSURE)
  • MIL-STD-210C & MIL-STD-810D, Method 510.2, Procedure I – SAND AND DUST
  • MIL-STD-810E, Method 509.3, Procedure I @ 5% – SALT FOG
  • MIL-STD-810D, Method 508.4 – FUNGUS
  • MIL-STD-810D, Method 506.2, Procedure I – RAIN WITH WIND
  • MIL-STD-810D, Method 512.2, Procedure I – IMMERSION ONE (1) METER
  • ATA 300, Category I – REQUIREMENTS FOR REUSABLE CONTAINERS

Support

guarantee
For warranty information, see our
Guarantee of Excellence
support
For additional support,
contact us