Pelican-Hardigg Single Lid style roto cases have been designed and tested to meet or exceed the applicable requirements of the following standards. Qualification is conducted through direct testing and/or engineering analysis of product and test similarity; testing has been conducted on containers of various sizes and configurations as applicable.

• MIL-STD-810E, Method 505.3, Procedure II - SOLAR RADIATION
• ASTM E96, MIL-C-4150J and ASTM D 1008-64 – WATER-VAPOR TRANSMISSION RATE (PERMIABILITY)
• FED SPECIFICATION L-P-390c, Type M. - TENSILE/ELONGATION/COMPRESSIVE/FLEXURAL
• FED-STD-101, Method 5009 – LEAK TEST
• FED-STD-101, Method 5016 & DOT 49CFR 178.350 – CONCENTRATED LOAD (STACK/SUPERIMPOSED)
• FED-STD-101, Method 5011 – HANDLING
• MIL-STD-810E, Method 514.4 – VIBRATION (COMPOSITE INPUTS)
• MIL-STD-810E, Method 516.4, procedure IV – SHOCK (TRANSIT DROP)
• MIL-STD-810E, Method 501.3, procedure I – TEMPERATURE (STORAGE, HIGH TEMPERATURE)
• MIL-STD-810E, Method 502.3, procedure I – TEMPERATURE (STORAGE, LOW TEMPERATURE)
• MIL-STD-810E, Method 507.3, Procedure I – RELATIVE HUMIDITY
• MIL-STD-810E, Method 500.3 – ALTITUDE (LOW PRESSURE)
• MIL-STD-210C & MIL-STD-810D, Method 510.2, Procedure I – SAND AND DUST
• MIL-STD-810E, Method 509.3, Procedure I @ 5% – SALT FOG
• MIL-STD-810D, Method 508.4 – FUNGUS
• MIL-STD-810D, Method 506.2, Procedure I – RAIN WITH WIND
• MIL-STD-810D, Method 512.2, Procedure I – IMMERSION ONE (1) METER
• ATA 300, Category I – REQUIRMENTS FOR REUSABLE CONTAINERS